Exhaust
Searching for performance boat exhaust manifolds and parts for your Malibu or other performance boat doesn’t have to be exhausting when you shop at Bakes Marine. As the owner of the world’s largest inventory of specialty inboard parts, we probably have what you are looking for. You might even say we have an exhaustive inventory of marine exhaust parts.
Our selection of performance boat exhaust manifolds and parts features top-quality products from Indmar Marine. You’ll find everything you need for boat exhaust systems here, from marine engine exhaust risers, manifolds and mufflers to exhaust manifold drain plugs and base hardware. We also have all the exhaust gaskets, fittings and hoses you will need for repairs and replacements.
If you can’t find what you need or have questions, our experienced staff is just a toll-free phone call or email away. We are dedicated to providing you the best service and value around.
-
Indmar Exhaust Fitting Nylon Elbow 3/4" NPT x 1" BarbIndmar nylon exhaust manifold elbow fitting. DO NOT replace this fitting with anything other than nylon. Replacing these fittings with brass causes the area around the fitting to act like zinc because of the metallurgic difference.
If you are looking for the 605084 ETX T fitting, it has been discontinued and you will need one of the 605012 and one of the 605019 for each manifold. Plugs will be removed and the fittings will be installed on each end of the exhaust manifold. Remove the t-fitting and install one of the plugs in its place.
Please Note that NPT Thread (National Pipe Thread) is not a measured size, it is rather an industry call-out size. The NPT call-out designation is not the true thread diameter inside or out. View images and use the thread conversion chart to find your NPT size.
Learn More$7.15
