Indmar Exhaust Fitting Nylon Elbow 3/4" NPT x 1" Barb

Indmar nylon exhaust manifold elbow fitting. DO NOT replace this fitting with anything other than nylon. Replacing these fittings with brass causes the area around the fitting to act like zinc because of the metallurgic difference.

If you are looking for the 605084 ETX T fitting, it has been discontinued You will need one of the 605012 and one of the 605019 for each manifold. The fittings will be installed on each end of the exhaust manifold and 

Product Specs:

• Can withstand Temperatures Above 250 Degrees Fahrenheit
• Fitting Measures on the Thread Side: 3/4 NPT - Approx 1-1/16" Inch
• Fitting Measures on the Hose barb Side: 1" inch
• Please Note that NPT Thread (National Pipe Thread) is measured differently than standard threaded fittings

Please Note that NPT Thread (National Pipe Thread) is not a measured size, it is rather an industry call-out size. The NPT call-out designation is not the true thread diameter inside or out. View images and use the thread conversion chart to find your NPT size.