Malibu Boats Response In Tank Fuel Pump Gen 3

Malibu Boats Response fuel pump. This in-tank high-pressure fuel pump was used on all 2007+ Response series Malibu Boats with an in-tank fuel pump. Models include the Malibu Response, Malibu Response LX, Response LXI, and Response TXi.

Product Specs:

• OEM Malibu Boats Fuel Pump
• This "short" pump is used on the Malibu Boats Response, Response LX, Response LXI, and Response TXI.
• Manufactured by Millenium Industries exclusively for Malibu Boats & Axis Wake.
• Gen 3 pump used on most Malibu Boats 2009+
• Gen 3 pump will replace Gen 2 Pump used in 2007/2008 boats
• 60 PSI fuel pump
• Not used on Indmar LSA Engines
• Malibu part #3020517.1
• Gasket Sold Separately; part #3020900

Installation Tips:

• Install the pump into the tank access hold and align the fitting on the pump toward the molded arrow in the tank
• Torque hardware to 52-65 inch pounds
• 1st Pass - After tightening the first bolt, tighten the next 3 bolts in 90-degree increments until all 12 bolts have been installed
• Starting with your last bolt tightened, go around clockwise and tighten each bolt in order until all bolts have been tightened again